Software

License

The following software systems (Freeform Origami, Origamizer, Rigid Origami Simulator) are proprietary software provided under the following license.
  1. The user is allowed to use the software if and only if both of the following conditions are satisfied. Before using the softwere, please contact me in advance.
    • (Non-Commercial Use) The use of the software is non-commercial.
    • (Attribution): The resulting works achieved using the software, e.g., research publications, exhibitions, educational workshops, etc. acknowledge the usage of the software and cite at least one of the following references.
      • Freeform Origami: reference [1],[2],[3] or [4]
      • Origamizer: [5],[6] or [7]
      • Rigid Origami Simulator: [8] or [9]
  2. Any other type of usage, e.g., commercial use, needs a separate permission. Please contact : tachi at idea.c.u-tokyo.ac.jp

利用ライセンス

本ページで公開されているソフトウェアシステム (Freeform Origami, Origamizer, Rigid Origami Simulator)は下記のライセンスで提供されるプロプライエタリ・ソフトウェアです。
  1. このソフトウェアは次の条件の両方を満たす限りにおいて利用が可能です。なお利用に際しては,必ず事前の連絡をお願いします。
    • (非商用)ソフトウェアの利用が非商用であること。
    • (クレジット) ソフトウェアを利用して得られた成果物(研究出版物,展示,教育目的のワークショップなどを含む)において,このソフトウェアを利用したことを明記し,下記を引用すること。
      • Freeform Origami: [1],[2],[3] または [4]
      • Origamizer: [5],[6] または [7]
      • Rigid Origami Simulator: [8] または [9]
  2. 上記に該当しない場合(営利目的利用など)をお考えの方は個別にご連絡下さい。:tachi at idea.c.u-tokyo.ac.jp
Freeoform Origami

[1] Tomohiro Tachi, "Freeform Origami", www.tsg.ne.jp/TT/software/
[2] Tomohiro Tachi, "Generalization of Rigid-Foldable Quadrilateral-Mesh Origami," Journal of the International Association for Shell and Spatial Structures (IASS), 50(3), pp. 173--179, December 2009.
[3] Tomohiro Tachi, "Freeform Variations of Origami", in Proceedings of The 14th International Conference on Geometry and Graphics (ICGG 2010), Kyoto, Japan, pp. 273--274, August 5-9, 2010.
[4] Tomohiro Tachi, "Freeform Rigid-Foldable Structure using Bidirectionally Flat-Foldable Planar Quadrilateral Mesh", Advances in Architectural Geometry 2010, pp. 87--102, September 2010.

Origamizer

[5] Tomohiro Tachi, "Origamizer", www.tsg.ne.jp/TT/software/
[6] Tomohiro Tachi: "Origamizing Polyhedral Surfaces," IEEE Transactions on Visualization and Computer Graphics, 16(2), pp. 298-311, 2010.
[7] Tomohiro Tachi: "3D Origami Design based on Tucking Molecule," in Origami4, pp. 259-272, 2009.

Rigid Origami Simulator

[8] Tomohiro Tachi, "Rigid Origami Simulator", www.tsg.ne.jp/TT/software/
[9] Tomohiro Tachi: "Simulation of Rigid Origami ," in Origami4, pp. 175-187, 2009.

Freeform Origami

This software is a design software that allows users to interact with origami forms while altering the crease pattern of the model. The software can keep:

Known Issues

[Solved] Crashing on Intel Graphics (from 2018)

History

2020/6/16 ver 1.1

2019/9/25 ver 1

2017/2/24 ver 0.3 Alpha

2016/3/18 ver 0.2.8 Alpha

2014/9/20 ver 0.2.6 Alpha (London ver.)

2014/1/23 ver 0.2.5 Alpha

2013/11/20 ver 0.2.4 Alpha

2013/04/02 ver 0.2.3 Alpha

2013/03/26 ver 0.2.2 Alpha

2013/03/25 ver 0.2.1 Alpha (Barbados ver.)

2013/02/04 ver 0.2.0 Alpha

2012/10/07 ver 0.1.9 Alpha

2011/09/16 ver 0.1.7 Alpha

2011/09/13 ver 0.1.6 Alpha

2011/09/08 ver 0.1.5 Alpha

2011/01/06 ver 0.1.3 Alpha

2010/10/17 ver 0.1.2 Alpha

2010/10/17 ver 0.1.1 Alpha

2010/10/16 ver 0.1.0 Alpha

Origamizer

This is a 3D origami design software. The software generates a crease pattern that folds into a given polyhedron.

  • Binary for win32 Origamizer047.zip (ver 0.47)

    History

  • 2008/08/29 ver 0.47 Release fixed problems in reading obj file generated by wings3D.
  • 2008/05/26 ver 0.43 Release
  • Rigid Origami Simulator


    Simulates kinematics of rigid origami from *.opx or *.dxf crease pattern.

  • Binary for win32RigidOrigami009.zip (ver 0.09)
  • Details on the system and method

    history

  • 2010/09/19 ver 0.09 fixed scaling bug.
  • 2010/08/30 ver 0.08 fixed several bugs.
  • 2009/05/24 ver 0.07 improved the accuracy.
  • 2008/08/28 ver 0.06 support for half folded final state specified by layer name.
  • 2008/08/12 ver 0.05 calculation speed up! support for X,Y,Z view
  • 2008/07/05 ver 0.04 fixed problems with importing dxf. support for unnested blocks.
  • 2007/12/18 ver 0.03 support for output in obj and bmp
  • 2007/09/29 fixed some bugs in file input / support for 0 vertex model.
  • 2007/09/29 ver 0.02 modified readme.txt (Mountain: red, Valley: blue)
  • 2007/09/28 ver 0.01 Release